Five tips for handling damage during hail season

Hail can fall any time of the year, but according to National Weather Service statistics, May is the most common month in southeast Wisconsin for hail that's pea-sized or larger. It was exactly a year ago that dozens of vehicles were at River City Auto Body with damage from quarter-sized hail that fell late morning on Saturday May, 7… exactly when there were a lot of cars out and about on family errands.

Hail damage is cosmetic. Your car still runs. But you have to look at the pockmarks and dents every time you're in your vehicle. Unrepaired cosmetic damage from hail is going to lower the resale value of your vehicle, or will cost you when your lease ends.

Here's how to handle hail damage:

1) If you're driving, safely reduce your speed. A pea-sized hailstone can fall at as much as 20 mph on a parked car. If you’re traveling at 65 mph in a head wind, the velocity of that little dent maker is more than tripled. And you'll hit more of them by covering distance.

2) If possible, get under an overpass in the breakdown lane with your hazards on until the storm passes. Hail episodes seldom last more than five minutes in a location.

3) If you have hail damage, don't delay in calling River City Auto Body and your insurer. Most dents are small. They can, however, compromise the paint's ability to prevent corrosion or rust on the underlying metal the longer the dents go unrepaired.

4) Hail damaged sheet metal may need to be hammered and painted. For lightly damaged surfaces, trained technicians may recommend paintless dent removal (PDR), which involves using tools on the underside of a damaged panel. Either process takes time… PDR takes less time, but usually in a hail event, a repair facility has several cars with the same damage awaiting repair.

5) Check the repair thoroughly under daylight and fluorescent light from a few angles. If it's not done to your satisfaction, remember it is YOUR car, not the insurer's.

 

 Photo by Andrei Seleznev, used with permission.

Work van or work truck painting and repair demand special handling

There's on-going debate over which type of vehicle is best for a contractor or fleet vehicle. Contractor website toolsofthetrade regularly surveys business owners to find out what they're driving. A standard pickup is the vehicle of choice for 40 percent. Standard vans are used by another 18 percent. Thirty-six percent use a trailer, cube van, or a pickup with a service body. River City Auto Body respects that this isn't just your point-A-to-point-B mode of transporting equipment…

…it's a rolling advertisement.

As an ad, the condition of the vehicle says a lot about the condition of the business. Remember the TV sitcom, 'Sanford and Son?' That was one beat-up pickup: Fred, Lamont, Grady, Rollo, and Bubba were some beat-up sketchy characters. That isn't to say a beater truck is always going to be driven by deadbeat contractors, however the service vehicle is often the first – or only – visible advertisement for contractors. Make it count.

Four things to consider:

1) Repair damage immediately. With the amount of miles a typical local business puts on a vehicle, collisions are always a risk. When you have collision damage that's unrepaired, consider how many people see your name next to the dent or scrape every mile it rolls down the road.

2) Elements and acid-rain deteriorate the image. Many times the service vehicle has to be stored outdoors all year due to its size compared to a standard height (or width) garage door. Wisconsin's climate isn't kind to your advertisement.

3) More aluminum is being used today than ever before. Check out the River City Auto Body archive on aluminum frames and body panels. These require specific certification to be repaired and repainted properly.

4) Taller service vans are growing in popularity. Dodge's Ram ProMaster and Ford's Transit are just two of the dozen vehicles on the market specifically for business owners. First, consider these are taller and you will need a repair business with the extra-tall paint bays needed to accommodate the size. (River City Auto Body can accommodate any vehicle, BTW.) Second, some of these vehicles are now coming into their second owners: If you're that second owner, do you want the old business's paint scheme? You'd only be advertising their business, not yours. Even when you peel off the old decals, the climate changed the paint around the old logo. Start fresh. It's your ad.

 Photo by A Ancu, used with permission.

Aluminum vehicles require high-tech, high-touch repair

Automakers are betting the ranch that aluminum body frames and panels will deliver the new fuel efficiency requirements imposed upon them. Aluminum, while lighter and potentially stronger than steel, doesn’t fare well in collisions as seen in some of River City Auto Body’s repair vehicles.

The dents require more care and more often than not require replacement of the panel. According to a Massachusetts Institute of Technology study, aluminum is more expensive than steel in a raw state, in its conversion to a usable sheet metal, and in its assembly — resulting in a 60 to 80 percent cost premium. That aside, you want the finish to last. River City Auto Body has been repairing and refinishing aluminum long before fuel economy became the reason for changing metals.


Ford is one automaker that was using aluminum well before they ramped up their flagship truck production to all-aluminum in 2015. A common issue with those older panels: Corrosion under the paint. It’s a quirky way the paint bonds to the metal that’s gotten better with manufacturing improvements. Some repair shops aren’t up to speed on those improved techniques.

Audi, Volvo, and several other luxury and sports brands have been using aluminum body panels for twenty years – Mercedes Benz even longer, going back to the early 20^th century. Those cars have an unwarranted reputation as being hard to fix right. According to Doug Richman, vice president of engineering for Kaiser Aluminum this simply isn’t true. “They’re not more complex, they’re not more difficult. They’re different.

“Technicians need aluminum-specific knowledge to do repairs properly,” he says. When repair staff is up to speed on aluminum repairs and how to avoid corrosion issues, your repair can be done efficiently, and the finish will last. River City Auto Body techs have this specialized training for this generation of vehicles, the last generation of aluminum cars, and the next one.

SAE International, initially established as the Society of Automotive Engineers, has an interesting write up on aluminum body repair for additional reading.

 Photo by Vlad Teodor, used with permission.